EUR
USD
GBP
CAD
AUD
HKD
JPY
KRW
SGD
NZD
THB
TWD
繁體中文
日本語
한국어
Français
Español
Nederlands
English
By GetMax TV Box | 03 June 2026 | 0 Comments
GetMax G12 Remote IR Learning Feature: Control Your TV and TV Box with One Remote
If your TV setup still requires switching between two remotes—one for the TV and one for your streaming box—you’re not alone.
Most users don’t notice it at first, but over time, it becomes a small daily frustration:
You turn on the TV with one remote, adjust the volume with another, then switch back to navigate content on your GetMax G12. It works, but it’s far from seamless.
The good news is that the GetMax G12 remote is designed to eliminate this problem through its built-in IR learning function, allowing you to control both devices with a single remote.
Why This Feature Actually Matters
The IR learning function is not just a technical add-on—it directly improves how you interact with your entire entertainment system.
Instead of constantly switching between remotes, you can consolidate the most important TV functions into the GetMax G12 remote, including:
• Turning the TV on and off
• Adjusting volume
• Muting sound instantly
Once configured, your viewing experience becomes smoother, more natural, and significantly more convenient—especially in living rooms with multiple users or shared family setups.
What You Need Before Setup
Before starting, prepare the following:
•Your GetMax G12 remote control (the learning device)
• Your original TV remote control (the source device)
Place both remotes facing each other, aligning the infrared signal areas (usually at the top front of each remote).
Keep them extremely close—around 3 to 5 mm apart is ideal for stable signal detection.
Step-by-Step Setup Guide
The process only takes a few minutes and does not require any technical knowledge.
❶ Activate Learning Mode
Press and hold the green TV power button on the GetMax G12 remote for about 5 seconds.
When the red LED indicator changes from blinking to a steady light, the remote has successfully entered learning mode.
At this stage, the remote is ready to receive commands from your TV remote.
❷ Position the Two Remotes Correctly
Make sure both remotes are:
• Facing each other directly
• Aligned at the infrared transmitter points
• Kept very close (a few millimeters apart)
A stable alignment is important—this step ensures successful signal capture.
❸ Program a Button (Core Step)
On the GetMax remote, press the button you want to customize (for example: volume +, volume –, mute, or power).
The red LED will start blinking, indicating it is waiting for a signal.
Now press the corresponding button on your original TV remote.
If the signal is successfully captured, you will see:
• The red LED flashes three times
• Then returns to a steady light
This confirms the command has been successfully stored.
❹ Repeat for Other TV Functions
You can repeat the same process to map additional buttons based on your needs.
Most users typically program:
• Power ON/OFF
• Volume Up / Down
• Mute
You can customize only what you actually use—there is no need to program everything.
❺ Exit and Save Automatically
Once you finish programming all desired buttons, simply press any normal button on the GetMax remote to exit learning mode.
The red LED will turn off, and all settings will be automatically saved to memory.
No additional confirmation is required.
What Your Setup Looks Like After Configuration
After completing the setup, your daily usage changes immediately.
Instead of managing two separate remotes, you can now use just one control device for most TV-related actions.
Your GetMax G12 remote can now:
• Turn your TV on and off
• Control volume and mute directly
• Navigate and operate the G12 interface
• Handle everyday entertainment without interruption
This is especially helpful in real-life scenarios such as:
• Watching TV in a dark room and not needing to find multiple remotes
• Elderly users who prefer simple, single-device control
• Families who share one TV system
• Living rooms with complex entertainment setups
The result is a cleaner, simpler, and more intuitive viewing experience.
Final Thoughts
The IR learning feature on the GetMax G12 remote is one of those small functions that quietly change daily convenience.
It doesn’t add complexity—it removes it.
With just a few minutes of setup, you reduce remote clutter, simplify control, and make your entire TV experience more unified.
If you are still switching between multiple remotes every day, this is one of the first settings worth enabling on your GetMax G12.
